Materials for producing models with desired characteristics for different styles
of jewelry, injection molds, auto parts, medical products and more.
All are
liquids that are cured in the Aureus machine by photopolymer- ization. Because the
Aureus process is additive, there is no wasted material.
All materials have a shelf life: 6 months for WIC100 and RC25; 1 year for PIC100 and R11. Please note: R11 and RC25
require a software upgrade.
For best results, models should be cured in the EnvisionTEC Post Curing System (see "Related Products" below) after removal from the Aureus machine. Post curing ensures optimal material hardening before molding or investing.
Type
|
Use |
Features |
Applications |
PIC100
(orange) |
Direct casting with R&R Plasticast investment. 1 year shelf life. |
Photo-cured resin for finest details without sacrificing toughness or finish. |
Production-capacity direct investment casting of fine jewelry parts. |
WIC100
(green) |
Direct casting with regular gypsum investment. 6 month shelf life. |
Photo-cured hybrid resin with nanowax for clean burnout with finest details. Nanowax burns off first without excessive expansion or pressure from degassing. |
Direct investment casting of your detailed master jewelry patterns. |
RC25*
(yellow) |
Molding with HD RTV silicone. 6-month shelf life. |
Nanoparticle-filled material used to build wear and temperature resistant parts. |
Injection molds, hard chrome plating, auto parts and more. |
R11*
(red) |
Molding with standard
mold rubber. 1 year shelf life. |
Photo reactive acrylate used to make parts with vertical and horizontal planes. Parts exhibit excellent strength, chemi- cal resistance and
tolerance to temperature
and humidity ranges. |
Master patterns for rubber molds of jewelry, medical products, snap-fit parts and auto parts. |
Photo-
silver
|
Direct Rubber Molding |
High definition ceramic-filled photopolymer produces the finest details. |
Can be molded directly from the machine for vulcanized or RTV molds. |
*
These materials require an upgrade to the software that comes with the machine.
EnvisionTEC Model Materials
IMPORTANT NOTE! If you have not purchased your EnvisionTec machine from Gesswein, please contact your EnvisionTec supplier for model materials. EnvisionTec does not permit distributors to sell EnvisionTec consumables to customers who have purchased their machine through another supplier.
