null

Stakes & Anvils

We have a wide selection of tools to use for raising and forming. 

  • Automatic Center Punch

    Automatic Center Punch

    sku: 8141100

    An extremely accurate tool which allows variable impressions by simply adjusting the knurled head. When depressed, a sharp blow results. Hammering is not required. Measures 4-3/4" overall length. Made in India.

    $30.85 / Each
    Add to Cart
  • Bench Block Helper with Steel & Nylon Blocks

    Bench Block Helper with Steel & Nylon Blocks

    sku: 8121645

    This 3-piece set includes a thick vulcanized firm rubber base which absorbs shock plus a solid steel block which is 15/16" (24mm) thick and 3" (75mm) in diameter. The third piece is a sturdy nylon block the same size that fits into the rubber...

    $29.95 / Set
    Add to Cart
  • Del Rey™ Center Punch

    Del Rey™ Center Punch

    sku: 8141103

    Use the Del Rey™ center punch to mark metal in preparation for drilling.  Hit the end with a hammer (not included) to create a small dimple which will help you center your drill when creating holes.  Can also serve as a scribe for design layout...

    $4.90 / Each
    Add to Cart
  • Durston Bangle Forming Die Set

    Durston Bangle Forming Die Set

    sku: 8141057

    This well made product from Durston helps you effortlessly form bangles and cuffs. Fits all standard bench vises. These dies and holder are precision ground, highly polished and hardened to last (with proper use). Set includes, special convex...

    $250.00 / Set
    Add to Cart
  • Fretz B-1 Flat Bezel Stake

    Fretz B-1 Flat Bezel Stake

    sku: 8141061

    This B-1 stake is distinguished by its sharp edge and flat top so you can hammer out sharp right angles without tedious cutting and mitering.   Use pliers to shape the bezel sheet around the stone as closely as possible, then use the stakes...

    $57.50 / Each
    Add to Cart
  • Fretz B-2 Sharp Edge Low Dome Bezel Stake

    Fretz B-2 Sharp Edge Low Dome Bezel Stake

    sku: 8141062

    This B-2 stake is distinguished by its sharp edge and slightly domed top so you can hammer out sharp right angles without tedious cutting and mitering.   Use pliers to shape the bezel sheet around the stone as closely as possible, then use the...

    $57.50 / Each
    Add to Cart
  • Fretz B-3 Sharp Edge High Dome Bezel Stake

    Fretz B-3 Sharp Edge High Dome Bezel Stake

    sku: 8141063

    This B-3 stake is distinguished by its sharp edge and a high domed top so you can hammer out sharp right angles without tedious cutting and mitering.   Use pliers to shape the bezel sheet around the stone as closely as possible, then use the...

    $57.50 / Each
    Add to Cart
  • Fretz B-4 Trillion Undercut Bezel Stake

    Fretz B-4 Trillion Undercut Bezel Stake

    sku: 8141064

    This B-4 stake is undercut for use with trillion and pear-shaped stones. Use pliers to shape the bezel sheet around the stone as closely as possible, then use the stakes to gradually stretch the sheet to match the corresponding curves and angles of the...

    $57.50 / Each
    Add to Cart
  • Fretz B-5 Rolled Edge Flat Stake

    Fretz B-5 Rolled Edge Flat Stake

    sku: 8141065

    This B-5 stake is distinguished by its rolled edge and flat top allowing you to hammer out bezels without tedious cutting and mitering.   Use pliers to shape the bezel sheet around the stone as closely as possible, then use the stakes to...

    $57.50 / Each
    Add to Cart
  • Fretz B-6 Rolled Edge Dome Bezel Stake

    Fretz B-6 Rolled Edge Dome Bezel Stake

    sku: 8141066

    This B-6 stake has a rolled edge and domed top allowing you to hammer out bezels without tedious cutting and mitering.   Use pliers to shape the bezel sheet around the stone as closely as possible, then use the stakes to gradually stretch the...

    $57.50 / Each
    Add to Cart
  • FRETZ BA-1 Bench Anvil Flat

    FRETZ BA-1 Bench Anvil Flat

    sku: 8141301

    The BA-1 Bench Anvil mushroom stake has a flat top for flattening and texturing metal, but can also use the slightly rounded edges to create nearly 90-degree angles in your workpieces. These anvils feature hardened 420 stainless steel tops that have a...

    $93.75 / Each
    Add to Cart
  • FRETZ BA-2 Bench Anvil Low Dome

    FRETZ BA-2 Bench Anvil Low Dome

    sku: 8141302

    This MA-2 low dome bench anvil is a mushroom stake that is ideal for creating slight curves in jewelry forms. Fretz Bench Anvils feature hardened 420 stainless steel tops that have a high polish to prevent scratching your jewelry metal. The hardwood...

    $93.75 / Each
    Add to Cart
  • FRETZ BA-3 Bench Anvil Med Dome

    FRETZ BA-3 Bench Anvil Med Dome

    sku: 8141303

    This medium dome bench anvil is a mushroom stake that allows you to shape and texture sheet metal.  Fretz Bench Anvils feature hardened 420 stainless steel tops that have a high polish to prevent scratching your jewelry metal. The hardwood...

    $93.75 / Each
    Add to Cart
  • FRETZ BA-4 Bench Anvil Hi Dome

    FRETZ BA-4 Bench Anvil Hi Dome

    sku: 8141304

    This high dome bench anvil is a mushroom stake that allows you to shape and texture sheet metal. Fretz Bench Anvils feature hardened 420 stainless steel tops that have a high polish to prevent scratching your work.  Features a wooden base to absorb...

    $93.75 / Each
    Add to Cart
  • FRETZ BA-5 Bench Anvil Square Dome

    FRETZ BA-5 Bench Anvil Square Dome

    sku: 8141305

    The BA-5 Bench Anvil is a 75mm (approx.3") square block which features a flat top ideal for flattening curves and four different top edges which you can translate into your jewelry metal through repeated hammer blows. The 4 edges are a sharp 90-degree, a...

    $105.45 / Each
    Add to Cart
  • FRETZ BH-1 Blow Horn Stake

    FRETZ BH-1 Blow Horn Stake

    sku: 8141120

    With a design based on a classic tinsmithing stake, the Fretz BH-1 Blow Horn Stake is perfect for forging bracelets and cuffs. You can also use the BH-1 to thin and raise thick stock. Compatible with Fretz H-101 and VF-101 holders (even though shown in...

    $309.25 / Each
    Add to Cart
  • FRETZ E-100 Extractor Wedge

    FRETZ E-100 Extractor Wedge

    sku: 8141042

    This extractor wedge can come in handy if a Fretz M-100 Series Stake becomes stuck in the E-101 Holder. Simply drive the E-100 Extractor Wedge into the oval hole in the E-101 to free the stake. Made in Vietnam.

    $31.35 / Each
    Add to Cart
  • FRETZ E-101 & E-100 Holder and Wedge Set

    FRETZ E-101 & E-100 Holder and Wedge Set

    sku: 8141043

    Money saving set consisting of both the E-101 holder and the E100 extractor wedge.  If your Fretz M-100 Series Stake becomes stuck in the E-101 Holder, you'll wish you had the wedge at your fingertips! You simply drive the E-100 Extractor Wedge into...

    $99.00 / Set of 2
    Add to Cart
  • FRETZ E-101 Extender Holder

    FRETZ E-101 Extender Holder

    sku: 8141041

     This E-101 extends the reach of the Fretz M-100 Series Mushroom Stakes by 80mm for assistance when forming large, curved shapes. The E-101 is designed to fit into the H-101 or the VH-101 Stake Holders (not included). Made in Vietnam.

    $79.00 / Each
    Add to Cart
  • FRETZ E-102 Curved Extender

    FRETZ E-102 Curved Extender

    sku: 8141044

     The unique curved shape of the E-102 holder positions the Fretz M-100 Series Mushroom Stakes uniquely which can be the exact striking angle you need but have trouble obtaining with any other holder.   The E-102is designed to fit into the...

    $84.25 / Each
    Add to Cart
  • Fretz F-1 Beak Miniature Forming Stake

    Fretz F-1 Beak Miniature Forming Stake

    sku: 8141092

    A classic silversmithing stake on a jewelry-making scale, the F-1 Beak Stake features two ends with a slight taper, which will translate into your metal through repeated hammer blows. Fretz stakes are made from hardened 420-grade stainless steel with...

    $68.15 / Each
    Add to Cart
  • FRETZ F-101 Large Beak Stake

    FRETZ F-101 Large Beak Stake

    sku: 8141114

    The Fretz F-101 Large Beak Stake is specifically designed for shaping steep domes on bracelets and hollowware, but if you utilize every piece of the stake, you can use it to create almost any form. Compatible with Fretz H-101 and VF-101 holders (shown in...

    $194.00 / Each
    Add to Cart
  • FRETZ F-102 Large Double Convex Stake

    FRETZ F-102 Large Double Convex Stake

    sku: 8141115

    The Fretz F-102 Large Double Convex Stake has two highly rounded ends perfect for forming deep domed shapes in your jewelry. By using the stake’s various curves and edges, you can achieve nearly any form you desire. Compatible with Fretz H-101 and VF-101...

    $194.00 / Each
    Add to Cart
  • FRETZ F-103 Large Doming Stake

    FRETZ F-103 Large Doming Stake

    sku: 8141116

    The Fretz F-103 Large Doming Stake has been designed to dome flat sheet metal, but you can also use it to forge heavy metal stock into convex or concave shapes. Compatible with Fretz H-101 and VF-101 holders (shown in a holder in the picture but all...

    $194.00 / Each
    Add to Cart
  • Fretz F-2 Double Convex Miniature Forming Stake

    Fretz F-2 Double Convex Miniature Forming Stake

    sku: 8141089

    The Fretz F-2 Double Convex Stake features two convex ends: one large for forming large, dramatic curves and one small for doming sheet metal. Using this stake helps you form domed bracelets, rings or bead shapes from flat tubular shapes.  The...

    $67.95 / Each
    Add to Cart
  • Fretz F-2A Lining Convex Flute Stake

    Fretz F-2A Lining Convex Flute Stake

    sku: 8141106

    Use this F-2A lining stake to begin to shape concave flutes. Draw the design lines with a sharp ink marker on the hollow metal domed shape.   For straight flutes use a straight hammer (consider our 8217031 HMR-2 Wide or our 8217032 HMR-3...

    $67.95 / Each
    Add to Cart
  • FRETZ F-2B Sharp Convex Flute Stake

    FRETZ F-2B Sharp Convex Flute Stake

    sku: 8141107

    Generally you would already have a basic concave flute created on your piece before you would use this F-2B stake to further refine the shape.  That is why this stake is available both individually and in a set (8141109) so you can easily use the...

    $67.95 / Each
    Add to Cart
  • FRETZ F-2C Extreme Sharp Convex Flute Stake

    FRETZ F-2C Extreme Sharp Convex Flute Stake

    sku: 8141108

    This F-2C stake is usually used to finish a concave flute by sharpening the high points.  That is why this stake is available both individually and in a set (8141109) so you can easily use the flute stakes in succession.  After beginning the...

    $67.95 / Each
    Add to Cart
  • FRETZ F-3 Doming Miniature Forming Stake

    FRETZ F-3 Doming Miniature Forming Stake

    sku: 8141095

    The F-3 Doming Stake from Fretz has two concave ends and a slightly rounded top for shaping rings, bezels, and other small domed shapes. Fretz stakes are made from hardened 420-grade stainless steel with highly polished areas to prevent scratching or...

    $67.95 / Each
    Add to Cart
  • FRETZ F-4 Cone Miniature Forming Stake

    FRETZ F-4 Cone Miniature Forming Stake

    sku: 8141096

    The Fretz F-4 Cone Stake features two tapering ends: one large and one small to form conical shapes of different sizes. You can also use the wide middle section to make concave curves in sheet metal. Fretz stakes are made from hardened 420-grade...

    $67.95 / Each
    Add to Cart
  • FRETZ F-5 Hoop Doming Miniature Forming Stake

    FRETZ F-5 Hoop Doming Miniature Forming Stake

    sku: 8141097

    Designed for making hoop shapes like earrings and rings, the F-5 Hoop Doming Stake from Fretz features two ends with flat faces perfect for forming tight curves. Fretz stakes are made from hardened 420-grade stainless steel with highly polished areas to...

    $67.95 / Each
    Add to Cart
  • Fretz F-6 Shell Miniature Forming Stake

    Fretz F-6 Shell Miniature Forming Stake

    sku: 8141091

    An incredibly versatile jewelry-making stake, the Fretz F-6 Shell Stake can be used to make bracelet sized shell-forms, bold concave shapes and narrow convex shapes, so you can create a range of anticlastic forms. Fretz stakes are made from hardened...

    $67.95 / Each
    Add to Cart
  • Fretz F-7 Thin Shell Miniature Forming Stake

    Fretz F-7 Thin Shell Miniature Forming Stake

    sku: 8141093

    This F-7 Thin Shell Stake is narrower than the F-6 so is perfect for forming small convex and concave curves to yield small-scale anticlastic shapes. Fretz stakes are made from hardened 420-grade stainless steel with highly polished areas to prevent...

    $67.95 / Each
    Add to Cart
  • Fretz F-8 Horn Miniature Forming Stake

    Fretz F-8 Horn Miniature Forming Stake

    sku: 8141094

    A classic silversmithing shape but on a jeweler’s scale, the F-8 Horn Stake is designed for hammering out hollow domed shapes, like making beads from tubes or bracelets or hollow rings, from sheet metal. Fretz stakes are made from hardened 420-grade...

    $67.95 / Each
    Add to Cart
  • Fretz F-9 Convex/Concave Miniature Forming Stake

    Fretz F-9 Convex/Concave Miniature Forming Stake

    sku: 8141090

    Use the F-9 Convex/Concave Stake to make a range of synclastic and anticlastic forms from shallow concave curves to S-shaped sculptures. One side is convex and allows you to make a shallow dome. The other side is for making concave bracelet sized jewelry...

    $67.95 / Each
    Add to Cart
  • Fretz FP-1 Wide Convex Cuff DVD & Tool Set

    Fretz FP-1 Wide Convex Cuff DVD & Tool Set

    sku: 8218411

    The Fretz FP-1 set included the tools (hammer and stakes) you need as well as the DVD to follow along - allowing you to make your own Wide Convex Cuff jewelry.  This package is such and excellent way to get started so it also makes a terrific gift...

    $735.25 / Set
    Add to Cart
  • Fretz FP-2 Set Wide Concave Cuff DVD & Tools

    Fretz FP-2 Set Wide Concave Cuff DVD & Tools

    sku: 8218412

    Terrific set which includes the hammers and stakes you need to follow along and make your own Wide Concave Cuff jewelry .  Excellent way to get started - and this set makes a terrific gift for someone who is starting out and doesn't already have the...

    $865.00 / Set
    Add to Cart
  • Fretz FP-3 Set Wide Convex and Concave Cuffs DVD & Tools

    Fretz FP-3 Set Wide Convex and Concave Cuffs DVD & Tools

    sku: 8218413

    Everyone who wants to make wide cuff jewelry - both Concave and Convex - this set is exactly what you need.  Comes with 2 DVDs for instruction and all the tools you need to get started, plus a handy storage rack.  Makes an excellent gift for...

    $1,195.00 / Set
    Add to Cart
  • FRETZ G-1 Hook Stake 200mm 291g

    FRETZ G-1 Hook Stake 200mm 291g

    sku: 8141141

    Use the small single curve of this G-1 Hook to make complex shapes without your jewelry metal binding to the stake. Bill Fretz and Michael Good worked together to develop stakes and hammers for Michael Good’s specialty: anticlastic raising. These hook...

    $119.10 / Each
    Add to Cart
  • FRETZ G-2 Hook Stake 200mm 287g

    FRETZ G-2 Hook Stake 200mm 287g

    sku: 8141142

    This G-2 Hook has a steeper curve allowing you to deepen your anticlastic forms; all without your jewelry metal binding to the stake. Bill Fretz and Michael Good worked together to develop stakes and hammers for Michael Good’s specialty: anticlastic...

    $119.10 / Each
    Add to Cart
  • FRETZ G-3 Hook Stake 200mm 188g

    FRETZ G-3 Hook Stake 200mm 188g

    sku: 8141143

    This G-3 Hook is used for small work or to close larger anticlastic forms; all without your jewelry metal binding to the stake. Bill Fretz and Michael Good worked together to develop stakes and hammers for Michael Good’s specialty: anticlastic raising...

    $97.50 / Each
    Add to Cart
  • FRETZ G-4 Hook Stake 200mm 182g

    FRETZ G-4 Hook Stake 200mm 182g

    sku: 8141144

    The G-4 Hook is used for small-scale forming and for tightening anticlastic forms.  All the while, your metal will not bind to the stake.   Bill Fretz and Michael Good worked together to develop stakes and hammers for Michael Good’s...

    $97.50 / Each
    Add to Cart
  • FRETZ G-5 Hook Stake 200mm 186g

    FRETZ G-5 Hook Stake 200mm 186g

    sku: 8141145

     The G-5 Hook is made for very small work and for further tightening anticlastic forms.  Bill Fretz and Michael Good worked together to develop stakes and hammers for Michael Good’s specialty: anticlastic raising. These hook stakes can be used...

    $97.50 / Each
    Add to Cart
  • FRETZ G-6 Hook Stake 200mm 188g

    FRETZ G-6 Hook Stake 200mm 188g

    sku: 8141146

    The G-6 is usually used to form small anticlastic forms and to close tiny speculums.  Bill Fretz and Michael Good worked together to develop stakes and hammers for Michael Good’s specialty: anticlastic raising. These hook stakes can be used...

    $97.50 / Each
    Add to Cart
  • FRETZ GH-1 Holder 85x78mm 293g

    FRETZ GH-1 Holder 85x78mm 293g

    sku: 8141140

    The GH-1 Holder is made to hold the Fretz line of Michael Good stakes. The screw on top keeps the stakes in place while the tapered tang is held in a vise. Made in Vietnam. 

    $108.00 / Each
    Add to Cart
  • FRETZ H-101 Holder

    FRETZ H-101 Holder

    sku: 8141047

    This H-101 holds the larger Fretz 100 Series Stakes to give you maximum control and flexibility while using larger stakes. The H-101 is designed to be mounted onto a sturdy base like your bench with socket head bolts and nuts (included). Made in Vietnam...

    $146.20 / Each
    Add to Cart
  • FRETZ H-1L Long Holder

    FRETZ H-1L Long Holder

    sku: 8141051

    The H-1L Long Holder holds all the Fretz Bezel T, Miniature Mushroom, Miniature Forming Stakes plus the M-100 Series Mushroom Stakes. The H-1L’s extended length gives you extra room for larger forming projects without worrying about striking your bench...

    $66.95 / Each
    Add to Cart
  • FRETZ H-2 5mm Accessory Tool Holder

    FRETZ H-2 5mm Accessory Tool Holder

    sku: 8141084

    The H-2 is a very small holder for Fretz Micro Mandrels, Micro Stakes, and Insert Wheels. The H-2 fits into the H-1 (not included) for very small-scale forming tasks. Made in Vietnam.

    $67.95 / Each
    Add to Cart
  • FRETZ I-1 4.7mm Round High Dome Insert

    FRETZ I-1 4.7mm Round High Dome Insert

    sku: 8141271

    This Fretz I-1 Insert can be used to create variety of shapes in small and large projects from shimmering dimples to 4.7mm high domes. Designed to be used with the Fretz H-2 Stake Holder (not included although it is shown in the picture) insert this into...

    $29.45 / Each
    Add to Cart
  • FRETZ I-10 35x4x13.8mm Taper

    FRETZ I-10 35x4x13.8mm Taper

    sku: 8141280

    The Fretz I-10 Taper Insert is perfect for creating small concave shapes. The I-10 Insert tapers from a 13.8mm diameter at its thickest point to its 4mm face. Designed to be used with the Fretz H-2 Stake Holder (sold separately). Fretz stakes are made...

    $34.55 / Each
    Add to Cart