The Flex Shaft TX300 Set contains just about everything you need to get to work — motor, speed control, handpiece and accessories. Take the guesswork out of product selection. The set offers great value — 40% off total retail value!

This set features smart tool combinations for specific applications:

1. TX Motor: Foredom’s most powerful flex shaft machine with 1/3HP. The TX motor is a permanent magnet DC motor that features the latest in flex shaft technology. This ball bearing model utilizes advanced rare earth magnets (in place of the wound fields in the universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load! It comes equipped with a motor bale for hanging and standard 39" long key-tip inner shaft and outer sheath.
2. #30 Handpiece: The #30 is our most popular general-purpose handpiece featuring a 3-jaw chuck with 0"–5/32" capacity. Supplied with a large chuck key for easy accessory changes.
3. TXR-1 Foot Rheostat: Features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. 7" long, 4-1/2" wide, 2-3⁄8" high.
4. Foredom Accessory Kit: A 43-piece assortment of professional jewelers/metal working accessories. Includes: ScotchBrite EXL Wheels, CW Polishing Wheels, Platinum White Compound, Rubber Bonded Abrasive Wheels, Jewelers Burs, Ceramic Purple Sanding Bands, Felt and Cotton Buffs, Mounted Brushes, Mandrels, Engraving Burs, V Stone Wheel and more.
5. Rotating Bur Holder for 3/32" shank accessories.
6. Flexible shaft grease and an extra pair of motor brushes.

Foredom TX Instruction Manual

How to Replace Shaft and Sheath

Foredom TX Tool Tips


Important Safety Instructions from FOREDOM®

Always wear proper eye and face protection—
Always wear safety glasses and or a face shield when using rotary power tools. Regular eyeglasses do not provide sufficient protection.

Never wear loose clothing or jewelry and tie back long hair—
Ties, scarves, jewelry and long hair pose a hazard when using rotary power tools.

Never use accessories at speeds above the maximum RPM—
Accessories used at faster than the recommended speed can become damaged, and hazardous to you and others in the work area. Always check the speed rating.

Never use a damaged accessory—
If an accessory appears to be bent, loose, vibrating or out of balance do not continue to use it. Use a clean sharp accessory that is recommended for the material you are working on. Let the speed of the tool do the work. Do not force the tool or use excessive side pressure.

Always use dust collection, respirator, or face mask to prevent inhalation of dust particles from workpiece or abrasives.

---

Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate) There are no comments for this product.