For efficient deburring of dozens of materials and hundreds of applications. Please refer to "Applications" tab above for specific materials applications for each blade shown below.

"B" Blades are 2.6mm thick and available for applications on steel, aluminum, stainless steel, copper, brass, cast iron, hardened steel, plastics, carbide, and glass.

"E" Blades are 3.2mm thick and are useful for heavy-duty applications on steel, aluminum, stainless steel, copper, brass, cast iron, hardened steel, plastics, carbide, and glass.

TiN coated blades (designated by a "P") are sold in packages of 2. All other blades are sold in packages of 10. Also see Shaviv Deburring Sets that include a handle plus blades.

Shaviv#	Gesswein#	Description
	846-2070	HSS. Deburrs materials with spiral chips.
	846-2075	PVD TiN coated for high resistance to wear. B10 geometry.
	846-2074	Long-lasting, cobalt-enriched. B10 geometry.
	846-2071	Extra thin, HSS. Deburrs holes with minimum diameter 0.08" (2mm).
	846-2076	PVD TiN coated for high resistance to wear. B11 geometry.
	846-2072	HSS. Rotates clockwise & counterclockwise.
	846-2077	PVD TiN coated for high resistance to wear. Rotates clockwise & counterclockwise. B20 geometry.
	846-2073	HSS. Thin-nosed. Specially designed for plastics.
	846-2078	HSS. Simultaneously deburrs the inside and outside of holes up to 0.16" (4mm) thick.
	846-2080	Heavy-duty HSS. Deburrs materials with spiral chips.
	846-2087	Long-lasting, cobalt-enriched. E100 geometry.
	846-2088	Thin-nosed, HSS. Deburrs holes with minimum diameter 0.06" (1.5mm).
	846-2086	PVD TiN coated for high resistance to wear. E111 geometry.
	846-2082	HSS. E shaft with B20 cutting edge for materials with powdery chips. Rotates clockwise & counter- clockwise.
	846-2085	HSS for materials with powdery chips. Rotates clockwise & counterclockwise.
	846-2083	PVD TiN coated for high resistance to wear. E200 geometry.
	846-2084	HSS for materials with spiral chips. Simultaneously deburrs the inside and outside of holes up to 0.24" (6mm) thick.

"B" blades are 2.6mm thick, while heavy duty "E" blades are 3.2mm thick. Both blade styles are suitable for deburring steel, aluminum, stainless steel, copper, brass, cast iron, hardened steel, plastics, carbide and glass.

---

Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate) There are no comments for this product.