PH3 Handpiece Motors

$425.00
Total ---
All Power Hand 3 rotary handpieces are two-part design so heads and motors can be switched to create new combinations to best suit your particular job. Use the system configuration chart (see tab above) to determine what heads and motors can be used together.

Note: Lower RPM motors have more available head options, while higher RPM motors are limited to either the Slender Head or Standard Head configurations.

There are 6 motors from which to choose: 3 High-Torque, 2 Standard (General Purpose), and 1 High-Speed.

Motors: M-08X M-15X M-30X M-20X M-35X M-55X
Minimum RPM: 1,000 1,000 1,000 1,000 1,000 1,000
Maximum RPM: 8,000 15,000 30,000 20,000 35,000 55,000
Max. Torque:
(Ncm)
9.8 8.8 6.8 6.4 5.4 3.6
Application: High-
Torque*
High-
Torque*
High-
Torque*
Standard* Standard* High-
Speed*
Net Weight: 6.2 oz. 6.2 oz. 6.2 oz. 4.25 oz. 4.25 oz. 3.2 oz.

* High-Torque Motors are for heavy grinding applications where high torque is required. When selecting a head attachment, please refer to the maximum rpm speed of the head attachment (see Motor/Head Compatibility tab above).
Standard Motors are small, lightweight motors for general purpose finishing. Fits comfortably in hand. For use with Standard Head and Slender Head attachments only (see Motor/Head Compatibility tab above).
The Z-55X High-Speed Motor is the lightest, fastest, and most comfortable high-speed motor. For use with Standard Head and Slender Head attachments only.(see Motor/Head Compatibility tab above).


Instruction Manual for M-08X 8103311

PDF Download: PH3_Controller

Instruction Manual for M-15X 8103321

PDF Download: PH3_Controller

Instruction Manual for M-20X 5103331

PDF Download: PH3_Controller

Instruction Manual for M-30X 5103341

PDF Download: PH3_Controller

Instruction Manual for M-35X 5103351

PDF Download: PH3_Controller

Instruction Manual for M-55X 5103371

PDF Download: PH3_Controller
Find these items on these pages in our catalog:
  • 428
    Every PH3 handpiece consists of 2 parts: a motor and a head with integrated quick-disconnect fitting to hold heads securely and make head changes fast. Optional heads are available so you can create your own custom handpieces to suit your individual requirements.
    For optimal performance of specialty heads, choose the 8,000rpm, 15,000rpm or 30,000rpm Power Hand 3 Handpiece or Handpiece Motor as indicated in the chart below. For work requiring high torque at low speed, add in the 4:1 Reduction Gear.

    Heads below fit both Power Hand 2 and Power Hand 3 handpiece motors.

    Handpiece Heads
    PH3 08X
    Motor
    8,000rpm
    PH3 15X
    Motor
    15,000rpm
    PH3 30X
    Motor
    30,000rpm
    Mini-Filer Head
    Reciprocating
    12,000 strokes/min.


    SZX Swing Head
    Side-to-Side Reciprocating
    8,000 strokes/min.


    120° Angle Head Z-CNX
    Max. 15,000rpm

    90° Angle Head Z-ANX
    Max. 15,000rpm

    Micro Angle Head
    Long Reach 90° Rotary
    Max. 15,000rpm

    Heavy-Duty Head
    Rotary for 1/4" Shanks
    Max. 30,000rpm
    Slender Head*
    Long Reach Rotary
    Max. 55,000rpm
    Standard Rotary Head*
    Replacement Head
    Max. 55,000rpm
    4:1 Reduction Gear
    Adds 4X Torque


    Blue dot indicates optimal performance for head & motor combination.

    * Both the Slender Head and the Standard Rotary Head work with all PH 3 Motors (M-08X, M-15X, M-20X, M-30X, M-35X, and M-55X).