IPS Pro 10A/25A from PEPETOOLS

$825.00
Special Order Item
Total ---

The ultra-modern IPS (Intelligent Plating System) Pro from Pepe is one of the most state of the art and intuitive system on the market today. The IPS Pro, available in both 10A and 25A, combines all the features of the IPS Plus and also includes a solution coil heater that fits a 1000ml beaker and is accurate up to +/- 1°C. This heater is fully programmable in either Fahrenheit or Celsius and maintains the set temperature perfectly! How does the plating system work? The IPS system is a user friendly, “one button” plating system that is fully programmable. During a plating process, your work piece may accidently touch the anode thus causing a short and would normally shut down the system, but not with the IPS! Plating is bypassed until the short is eliminated and will self-restore and continue working with the preset values entered. Optional Two (2) internal counters provide an important measuring function that allows user to properly maintain plating bath, regulate the thickness of the plating and also calculate the amount of material being used. Just set the values you require and Press the Start button…it’s that easy! IPS Pro will turn on and turn off at the pre-set time! The fully programmable IPS Pro offers the best solution for electroforming. The sequential (staged) process provides an environment for a properly controlled crystal growth and the necessary density of the deposits – both factors contribute to a perfect shiny non-pitted finish. Included with this kit is the IPS Pro Control Unit, Power Cord, Set of Lead Wires and Coil Heater.

Features:

Fully Programmable Features such as:

  • Ability to set plating voltage and amperage
  • Ability to set plating time (1 second to 9 hours and 59 seconds)
  • Reverse polarity time
  • Integrated Amp hour counter
  • Storage space for (5) individual programs. Each storage can store parameters such as:
    1. Plating Time
    2. Reverse Polarity Time
    3. Current Voltage
    4. Current Amperage
    5. Start Delay
    6. Current Voltage
  • Sequential Programming that allows in order to run larger plating operations
  • Fully programmable heater coil, accurate to +/- 1°C. Fits in any standard 1000ml beaker.
Find these items on these pages in our catalog:
  • NEW
    Input Power: 110V, 6A / 220V, 3A, 50/60Hz
    Output Power: 10A (12V) or 25A (12V)
    Operating Temperature: +40°F - +104°F (+5°C - + 40°C)
    Dimension (W x H xD): 4” X 6” X 10” (100 X 150 X 260mm)
    Weight: 6lbs. (2.7kg)
    Made In: USA