Build Platform for Solus Pro

sku: 2621002

Replacement Build Platform for Solus Pro.   Warning: The build platform needs to be calibrated before use. Failure to do so may result in damage to the machine. Please watch the build table calibration video and calibrate the build plate before...

Formlabs Form Cure

sku: 2620165

Unlock Peak Performance with the Formlabs Form Cure. Once your parts are created in the Form 2 - Advanced Desktop 3D Printer, they travel straight to the Form Wash  (See related products below). The Form Wash automatically cleans your parts...

Formlabs Form Wash

sku: 2620164

Automate Cleaning with Form Wash Once your parts are created in the Form 2 - Advanced Desktop 3D Printer, they travel straight to the Form Wash. THOROUGH, AUTOMATED WASHING: Form Wash's impeller agitates isopropyl alcohol (IPA) to flow around every...

Formlabs® "Long Term" Resin Tank for Form 2

sku: 2620163

Formlabs Resin Tank Long Term (LT) is suited for long term use and rigorous, high volume printing. The Long Term Resin Tank lasts 20x longer than the standard resin tank and has more accurate printer detection, anti-spill geometry, and easier wiper...

Formlabs® Build Platform 2 with QRT

sku: 2620434

Formlabs Build Platform 2 has Quick Release Technology built in so your pieces can be "popped" off, saving time and eliminating possible damage which can occur when you pull them off. As always, having a spare Form Build Platform can speed up your...

Formlabs® Build Platform for Form 2/3

sku: 2620433

A spare Form Build Platform can speed up your workflow, whether you’re changing resins or starting a new print while you remove your part. Having two Build Platforms can help you switch between jobs faster. You can wash and finish a piece on one...

Formlabs® Form 3 Finishing Kit

sku: 2620436

With any 3D printing process, there are key finishing steps to get a print to its final, ready-to-use form. The Form 3 Finish Kit post-processing is quick and easy. The Finish Kit helps keep your workspace clean and organized while putting the finishing...

Formlabs® Form 3L Build Platform

sku: 2620620

The Form 3L Build platform is made to be used only with the Form 3L unit.  As with the other versions, having spare build platforms is highly  recommended to speed up your workflow and allow for nonstop printing.  For  example, it...

Formlabs® Resin Tank 2.1

sku: 2620432

The Formlabs Form 3 Resin Tank Version 2.1 can be used with all Formlabs resins and is the only tank that can be used on the Form 3 with the Formlabs Castable Wax 40 Resin (CW40), our 262-0391. When not in use, store in a cool, dark place and use the...

Formlabs® Resin Tank for Form 2

sku: 2620166

Your Resin Tank should be replaced every 1-1.5 liters of resin used. A combination of factors such as print volume, model geometry, layer thickness, resin type, and model orientation and layout, determines the individual lifetime of a tank. If you're...

Formlabs® Two-year Extended Warranty Plan

sku: 2620184

One-year Pro Service Plan for Form 2 or Form 3 (262-0159) Two-year Pro Service Plan for Form 2 or Form 3 (262-0189) Two-year Extended Warranty Plan for Form 2 or Form 3 (262-0184)  Click Here to view the Pro Service Plan...

Formlabs® Two-year Pro Service Plan

sku: 2620189

One-year Pro Service Plan for Form 2 or Form 3 (262-0159) Two-year Pro Service Plan for Form 2 or Form 3 (262-0189) Two-year Extended Warranty Plan for Form 2 or Form 3 (262-0184)  Click Here to view the Pro Service Plan.

Gesswein® UV Curing Chamber 110V

sku: 2620195

Designed to cure (harden) 3D printed resin models after production prior to casting.  Specialty high intensity UV lamp cures models in 3-5 minutes, depending on the resin being cured.  Recommended to operate at 2-3 minute intervals to...

Gesswein® UV Curing Chamber 220V

sku: 2620197

Verify Voltage - 220V for export. 110V available for USA, see related products below. Designed to cure (harden) 3D printed resin models after production prior to casting.  Specialty high intensity UV lamp cures models in 3-5 minutes,...

Rapid Prototype Finishing Kit

sku: 8100035

Models produced on 3D printers may have smooth surfaces but they are not highly polished. By giving them a mirror finish before casting or mold making the end product will require much less finishing. Thus, the manufacturing consistency and surface...

Repl. Film for Solus Pro

sku: 2621003

Replacement long-lasting, non-stick film for the Solus Pro resin tank. 

Replacement Lamp for Gesswein® UV Curing Chamber

sku: 2620196

Replacement Parts for EnvisionTEC Aureus RP Machine - Standard Tray

sku: 2620122

Solus Pro Aluminum Resin Tank

sku: 2621001

The Aluminum Resin Tank for the Solus PRO 3D printer is CNC'd from aircraft-grade aluminum.  Designed to last for a very long time.

UV Post Curing Chamber - 110V

sku: 2620190

Designed to cure (harden) 3D printed resin models after production prior to casting.  Settings include run times in intervals of 5 and 10 minutes and continuous mode.  Curing time will vary and depends on the type of material (resin) used and...

UV Post Curing Chamber - 220V

sku: 2620191

Designed to cure (harden) 3D printed resin models after production prior to casting.  Settings include run times in intervals of 5 and 10 minutes and continuous mode.  Curing time will vary and depends on the type of material (resin) used and...

UV Post Curing Chamber Replacement Lamp

sku: 2620192