Foredom® Model TXH+30H+SXR Kit

Total ---

The Foredom TXH (H= Heavy Duty) Flex Shaft provides full torque and smooth, controlled acceleration throughout the entire speed range. Ideal for stone setting, wax carving, polishing, milling, drilling and other applications that call for high torque. Capable of this torque due to the fact that they use rare earth magnets in place of universal wound magnets. Offers great control under any load. Made in USA. 

Speed range: 0–15,000rpm. 115V, 50/60Hz. (Not available in 230V.)

Please note: The TXH flexible shaft machine has a 1/4" square drive.

The TXH is a hanging-style square-drive flexible shaft motor with heavy-duty 60" flexible shaft with sheath liner / silencer. Ideal for the toughest applications using large stones and tools mounted on 1/4" and 6mm shanks.

Kit includes:

  • 1/3 HP TXH Motor with heavy duty shaft and sheath.
  • Solid-state cast iron SXR Foot Rheostat - Provides exceptionally smooth control over the entire speed range. Features heavy-duty cast iron housing and skid-resistant bottom.
  • Heavy-duty #30H Handpiece - Features three-jaw Jacobs chuck that accommodates shanks up to 5/32" and prelubricated ball bearings for maintenance-free operation. Comes complete with chuck key. Measures 1" diameter x 5-5/8" long. Weighs 7.25 oz.
Two year warranty on motor. Available in 115V only.

TXH with heavy duty shaft and sheath can ONLY work with Foredom's square-drive handpieces: 25H, 30H (included with kit), and 44HT.

Important Safety Instructions from FOREDOM®

  • Always wear proper eye and face protection—
    Always wear safety glasses and or a face shield when using rotary power tools. Regular eyeglasses do not provide sufficient protection.
  • Never wear loose clothing or jewelry and tie back long hair—
    Ties, scarves, jewelry and long hair pose a hazard when using rotary power tools.
  • Never use accessories at speeds above the maximum RPM—
    Accessories used at faster than the recommended speed can become damaged, and hazardous to you and others in the work area. Always check the speed rating.
  • Never use a damaged accessory—
    If an accessory appears to be bent, loose, vibrating or out of balance do not continue to use it. Use a clean sharp accessory that is recommended for the material you are working on. Let the speed of the tool do the work. Do not force the tool or use excessive side pressure.
  • Always use dust collection, respirator, or face mask to prevent inhalation of dust particles from workpiece or abrasives.
    • 436