Accessories and Replacement Parts for PUK 3, 4, 4c, 5, U4 and U5

$8.50 - $999.00
Drop Shipped Item
Total ---

Argon Gas Regulator (Item# 830-1516)
The PUK flow regulator enables the exact setting of the recommended 2 liters per minute flow rate. It's precise and easy but above all, it’s reliable! The argon gas allows for clean, oxidation free welds.

Argon Screw Nut (Item# 830-1521)

Electrode Collets - 0.6mm Collet (Item# 830-0931),  0.8mm Collet (Item# 830-0933)

Electrode Sets0.6mm Electrod (Item # 830-0932), 0.8mm Electrod (Item #830-0934)
10 pre-sharpened  electrodes for immediate use. The thin electrode increases precision by touching the exact spot of weld. Just prior to weld, the electrode pulls back into the handpiece allowing for a clean and precise weld spot.

Handpiece Cap (Item # 830-1524)

Electrode Sharpener (Item # 830-1528)
For simple and rapid sharpening of PUK electrodes. The diamond disc rotates when the button is pressed allowing for quick and convenient electrode sharpening. The unit plugs into the back of the machine.

Electrode Sharpener Diamond Wheel (Item # 830-1531)
Replacement diamond wheel for Electrode Sharpener. See video on gesswein.com for instructions.

Microscope Glass (Item # 830-0966)

Microscope Rubber Eye Flaps (Item # 830-1512)

Pin Vise, Double Ended (Item # 820-4650)
Wire holder capacity: 0"-0.099"

PUK Wire Holder (Item # 830-2500)
Made of aluminum anodized, the PUK Wire holder feeds wires from 0.004" to 0.025". During the welding process, the ergonomic holder is comfortable to grip and the wire feeds effortlessly by means of two wheels. Measures 5.5” x .25” Diameter and weighs 1.5 oz. Made in Germany. Wire holder capacity: 0.004"-0.025"

PUK  Extension Package for  PUK U5 (Item # 830-0939)
Extend the reach of your PUK U5 with the PUK U5 Extension Package! For some large molds and in-press repairs, a few extra feet of reach may be necessary. This package includes an extended handpiece, extended magnet ground, and microscope extension cables. The extended handpiece measures approx. 8’ (2.5m) compared handpiece with the 4' cord  included with the PUK U5. The extended magnet cable measures 8’ in length. The microscope extension cables add on an additional 6.5’ in length to the standard PUK microscope, thus totaling 12.5’ in overall length. 

PUK U5 Handpiece (Item # 830-0938) has a longer 125cm (4') cable for extra extension applications.

Handpiece Complete Assembly for PUK 3, 4, 5.  90cm (3') in length.  (Item # 830-1533) 

Microscope Splitter (Item # 830-1555) Use the microscope splitter to connect the PUK U5 microscope to PUK U4 welder.

Find these items on these pages in our catalog:
  • 560
  • 561
  • 900
  • 995
  • 999