 |
Argon Gas Regulator |
830-1516 |
The PUK® flow regulator enables the exact setting of the recommended 2 liters per minute flow rate. It's precise and easy but above all, it’s reliable! The argon gas allows for clean, oxidation-free welds. |
 |
Argon Screw Nut |
830-1521 |
Ferrule nut for securing the argon hose to the regulator and PUK Controller |
 |
Electrode Collets |
830-0988
830-0931
830-0933
830-1503 |
0.5mm Collet
0.6mm Collet
0.8mm Collet
1.0mm Collet |
 |
Electrode Sets |
830-1499
830-0934 |
10 pre-sharpened electrodes, 50mm in length for immediate use are available in two diameter sets, 0.6mm (830-1499) and 0.8mm (830-0934). The thin electrode increases precision by touching the exact spot of weld. Just prior to the weld, the electrode pulls back into the handpiece for a clean and precise weld spot. Thorium-oxide free. |
 |
Extended Electrode Pair |
830-1598 |
1.0mm diameter x 200mm |
 |
Long Ceramic Tips (Handpiece Cap) 30mm |
830-1592 |
Fits PUK 3 and up. |
 |
Long Ceramic Tips (Handpiece Cap) 50mm |
830-1593 |
Fits PUK 3 and up. |
 |
Long Ceramic Tips (Handpiece Cap) 100mm |
830-1594 |
Fits PUK 3 and up. |
 |
Electrode Sharpener |
830-1528 |
For simple and rapid sharpening of PUK® electrodes. The diamond disc rotates when the button is pressed, allowing for quick and convenient electrode sharpening. Plugs into a 100V and 230V outlet with adapter. |
 |
Electrode Sharpener Diamond Wheel |
830-1626 |
Replacement diamond wheel head for the PUK® Electrode Sharpener (830-1528). Ideal for simple and rapid sharpening of your PUK® electrodes. See video below for instructions. |
 |
Microscope Glass |
830-0966 |
Replacement shutter glass located at the bottom of the viewing area of the microscope. |
 |
Microscope Rubber Eye Flaps |
830-1512 |
Replacement rubber eye flaps located on the oculars of the microscope. |
 |
Pin Vise, Double Ended |
830-4650 |
Wire holder capacity: 0" - 0.099" |
 |
PUK® Wire Holder |
830-2500 |
Made of aluminum anodized, the PUK Wire holder feeds wires from 0.004" to 0.025". During the welding process, the ergonomic holder is comfortable to grip and the wire feeds effortlessly by means of two wheels. Measures 5.5" x .25" diameter and weighs 1.5oz. Made in Germany. |
 |
PUK® Extension Package for the PUK® U5 |
830-0939 |
Extend the reach of your PUK® U5 with the Extension Package! For some large molds and in-press repairs, a few extra feet of reach may be necessary. This package includes an extended handpiece, extended magnet ground, and microscope extension cables. The extended handpiece cord measures approximately 8' (2.5m). Handpiece with a 4' cord is included with the PUK® U5. The extended magnet cable measures 8' in length. The microscope extensions cables add on an additional 6.5' in length to the standard PUK® microscope, thus totaling 12.5' in overall length. |
 |
PUK® U5 Handpiece |
830-0938 |
Standard handpiece with 125cm (4') cable. |
 |
PUK® Handpiece U5 Extended |
830-0927 |
Extended handpiece with 2500CM (8' cable). |
 |
Microscope Splitter |
830-1555 |
Use the microscope splitter to connect the PUK® U5 microscope to PUK® U4 welder. |
 |
PUK® Replacement Magnet Ground Cable |
830-0967 |
Will work with Mold & Die and General Industry PUK® U5 welders.
|
 |
PUK® Collet Nut for Handpiece |
830-1523 |
Fits all PUK® handpieces. |
 |
Replacement Handpiece Standard Cap 3mm |
830-1524 |
Fits PUK® 3 and up. |
| Replacement Handpiece Standard Cap 4mm |
830-1502 |
Fits PUK® 3 and up. |
 |
PUK® U5 Transport Case |
830-1558 |
Durable transport case for moving PUK® U5 safely and securely.
|
 |
Replacement Rubber Gasket for PUK® Handpiece Cap |
830-1630 |
Used with 3mm (830-1524), 4mm (830-1502), 30mm (830-1592), 50mm (830-1593), and 100mm (830-1594) replacement caps. |
|
PUK® Copper Electrode (Tack) |
830-0919 |
Will work with General Industry PUK® U5 welders. |
|
PUK U4/U5 Magnetic Base |
830-0926 |
Replacement magnetic base for microscope. |