Sisma Water Chiller and Heat Exchanger

Price Varies
Total ---

THE CHILLER UNIT IS ONLY REQUIRED UNDER THE FOLLOWING AMBIENT WORK CONDITIONS:

  • SWT 100 and 150: Ambient work temperature higher than 30ºC (86°F)
  • SWA 150 and 300: Ambient work temperature higher than 35°C (95°F)

The Water Chiller is necessary for the SWA 150/300 and SWT 100/150 when the unit is in environments where the working temperature is above 30°C or 35°C respectively. The Water Chiller is used for additional cooling.

The SWA150 and SWT150 also need the Heat Exchanger for the Water chiller to perform properly. It aids with the heat transfer to keep the laser welder cool. See chart below for matching Heat Exchanger for your Chiller.

Electrical for the Water chiller, 230V, 1 PH, 50/60 Hz. Measures 486L x 690W x 622Hmm (19" X 27" X 24.5") Weighs 165 lbs. (75kg) Shipping weight with crate 218 lbs. (99kg).

Electrical for Heat Exchangers for the SWA 150 and the SWT 150 is 230V, 50/60 Hz.  Each measures 8.25"L x 11.5"W x 4"H (216 x 292 x 102mm). Weighs 22 lbs. (10kg). Made in Italy.


Model Water Chiller Item # Required Heat Exchanger Item #
SWA 150 830-1835 830-1769
SWA 300 830-1835 N/A
SWT 100 830-1835 N/A
SWT 150 830-1835 830-1768
  • NEW