Grobet USA® Teborg® Large Oval Cutters - Flush

$50.95
Total ---

Grobet USA® Swiss-made Teborg® cutters are made to the highest standards. The award-winning handles were designed to fit comfortably in your hand and maximize visibility of your work area.  The rounded edges and bottoms and the anti-slip gripping surface make these slim, ergonomic handles stand out from the rest.

All cutters are constructed with adjustable screw lap joints.  The lap joints minimize friction and the ability to adjust the screw maximizes jaw alignment.

The high-quality ball bearing steel used in the manufacture of the cutters has a Rockwell Harness of 63.  The manufacturer provides a limited lifetime warranty against defects (see details below).

Teborg cutters are available with three types of cutting blades – semi-flush (SF), flush (FL) or full-flush (FF).  See the drawings below to select the type of cut. Made in Switzerland.

  • Light weight with ergonomic cushion grip handles
  • Dual leaf springs made of stainless steel
  • Adjustable screw lap joints provide a high level of strength and precision.

Cutting Blades

Cutting Blade Definition

Limited Lifetime Warranty: Teborg® Pliers & Cutters carry a limited lifetime warranty against defects in material and workmanship. Wear and tear from normal use is not covered by warranty. Abuse and abnormal use is also exempt from warranty coverage. Warranty claims are to be made through dealer where the tool was purchased. All warranty claims are subject to approval by Grobet® USA and may result in tool repair or replacement with tool of equal value.

Teborg Cutter Diagram
Item # Type of Cut Dimensions Cutting Capacity
A
Overall Length
B
Cutting Length
C
Head Width
D
Head Thickness
E
Oblique Tip Width
F
Cutter Tip Width
G
Oblique Head Length
Soft Medium Hard
Small Oval Cutters
182-4010 Semi-Flush 125mm
(4.9")
10mm
(0.39")
10mm
(0.39")
6.4mm
(0.25")
- 0.5mm
(0.02")
- 0.2 - 1.2mm
(32 - 17 AWG)
0.1 - 1.0mm 
(38 - 18 AWG)
0.03 - 0.6mm
(48 -23 AWG)
182-4011 Flush 125mm
(4.9")
10mm
(0.39")
10mm
(0.39")
6.4mm
(0.25")
- 0.5mm
(0.02")
- 0.1 - 1.2mm
(38 - 17 AWG)
0.1 - 1.0mm 
(38 - 18 AWG)
-
182-4012 Full-Flush 125mm
(4.9")
10mm
(0.39")
10mm
(0.39")
6.4mm
(0.25")
- 0.5mm
(0.02")
- 0.1 - 1.0mm
(32 - 18 AWG)
0.1 - 0.8mm 
(38 - 20 AWG)
-
Large Oval Cutters
182-4013 Semi-Flush 125mm
(4.9")
12.5mm
(0.49")
12.5mm
(0.49")
6.4mm
(0.25")
- 0.5mm
(0.02")
- 0.3 - 1.6mm
(29 - 14 AWG)
0.1 - 1.3mm 
(38 - 16 AWG)
0.03 - 0.7mm
(48 -21 AWG)
182-4014 Flush 125mm
(4.9")
12.5mm
(0.49")
12.5mm
(0.49")
6.4mm
(0.25")
- 0.5mm
(0.02")
- 0.2 - 1.6mm
(32 - 14 AWG)
0.1 - 1.2mm 
(38 - 17 AWG)
-
182-4015 Full-Flush 125mm
(4.9")
12.5mm
(0.49")
12.5mm
(0.49")
6.4mm
(0.25")
- 0.5mm
(0.02")
- 0.2 - 1.2mm
(32 - 17 AWG)
0.1 - 1.0mm 
(38 - 18 AWG)
-
X-Large Oval Cutters
182-4016 Semi-Flush 130mm
(5.1")
14mm
(0.55")
16mm
(0.63")
6.4mm
(0.25")
- 0.5mm
(0.02")
- 0.4 - 2.0mm
(26 - 12 AWG)
0.3 - 1.6mm 
(29 - 14 AWG)
0.05 - 0.9mm
(44 -19 AWG)
182-4017 Flush 130mm
(5.1")
14mm
(0.55")
16mm
(0.63")
6.4mm
(0.25")
- 0.5mm
(0.02")
- 0.3 - 1.6mm
(29 - 14 AWG)
0.3 - 1.5mm 
(29 - 15 AWG)
-
182-4018 Full-Flush 130mm
(5.1")
14mm
(0.55")
16mm
(0.63")
6.4mm
(0.25")
- 0.5mm
(0.02")
- 0.3 - 1.62mm
(29 - 14 AWG)
0.3 - 1.1mm 
(29 - 17 AWG)
-
Large Oblique Cutters
182-4020 Flush 130mm
(5.1")
14.5mm
(0.57")
10mm
(0.39")
6.4mm
(0.25")
- - 11mm
(0.43")
0.2 - 1.2mm
(32 - 17 AWG)
0.1 - 1.0mm 
(38 - 18 AWG)
-
Micro Oblique Cutters
182-4022 Full-Flush 130mm
(5.1")
20mm
(0.79")
10mm
(0.39")
6.4mm
(0.25")
0.5mm
(0.02")
- 6mm
(0.24")
0.4 - 2.0mm
(26 - 12 AWG)
0.3 - 1.6mm 
(29 - 14 AWG)
0.05 - 0.9mm
(44 -19 AWG)
  • NEW