Foredom® Model TXH+30H+TXR Kit

Total ---

Foredom's most powerful flex shaft machine with 1/3 HP. TXH has a permanent magnet DC motor that features the latest in flex shaft technology. This ball bearing model utilizes advanced rare earth magnets (in place of the wound fields in the universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. A heavy duty flex shaft is the ultimate power tool for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories.

Comes equipped with a 63" extra-long square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. (Heavy duty shafts and sheaths can only work with Foredom H series handpieces, specifically: 25H, 30H and 44HT, see "Related Products" below.) Made in USA. 

Please note: The TXH flexible shaft machine has a 1/4" square drive.

Kit includes:

  • 1/3 HP TXH Motor
  • Solid-state TXR Foot Rheostat - Provides exceptionally smooth control over the entire speed range. Features heavy-duty low-profile housing and skid-resistant bottom.
  • Heavy-duty #30H Handpiece - Features three-jaw Jacobs chuck that accommodates shanks up to 5/32" and prelubricated ball bearings for maintenance-free operation. Comes complete with chuck key. Measures 1" diameter x 5-5/8" long. Weighs 7.25 oz.
Two year warranty on motor. Available in 115V only.

Foredom TXH Instruction Manual

How to Replace Shaft and Sheath

Important Safety Instructions from FOREDOM®

  • Always wear proper eye and face protection—
    Always wear safety glasses and or a face shield when using rotary power tools. Regular eyeglasses do not provide sufficient protection.
  • Never wear loose clothing or jewelry and tie back long hair—
    Ties, scarves, jewelry and long hair pose a hazard when using rotary power tools.
  • Never use accessories at speeds above the maximum RPM—
    Accessories used at faster than the recommended speed can become damaged, and hazardous to you and others in the work area. Always check the speed rating.
  • Never use a damaged accessory—
    If an accessory appears to be bent, loose, vibrating or out of balance do not continue to use it. Use a clean sharp accessory that is recommended for the material you are working on. Let the speed of the tool do the work. Do not force the tool or use excessive side pressure.
  • Always use dust collection, respirator, or face mask to prevent inhalation of dust particles from workpiece or abrasives.
    • 436