Both Z-2X and Z-6X provide standard back-and-forth reciprocating action. They hold 2.0 to 6.35mm (1/4") diameter tools. Secured tools can float freely and be fixed at any position through 360°.
Z-2X has a 0-2.0mm length of stroke with a variable strokes per second rate up to 117.
Z-6X has a 0-6.0mm length of stroke with a variable strokes per second rate up to 70.
Both handpieces should be used with our Tool Holders.
Safety Recommendations for Reciprocating Profilers:
Prolonged use of vibrating or reciprocating tools may result in vibration-induced circulation problems in the hands. Always follow safe operating procedures. Using hand protection (i.e., insulated gloves) and taking frequent breaks can help minimize but not guarantee against injury. Operating these types of tools in cold weather or with a tight grip will reduce the period of operation before risking potential injury. Individuals with a tendency to suffer from poor circulation, frequently cold fingers or itchy hands should closely monitor the condition of their hands. If symptoms appear, seek medical advice immediately.