null

Cyber Week Specials! 10% off Sitewide + Free Ground Shipping, up to 40 lbs*. Offer Ends 12/6/24. See Terms.

Mold Maintenance Supplies

Gesswein mold cleaners evaporate fast. Eliminate wiping and contamination.

 Mirror finish molds require extra care:

• Never use shop rags or cleaning wipes as they can leave scratches.
• Fingerprints can show up as rust of oxidation in a short time frame so you should avoid touching.
• Moisture can cause a thin film of condensation as a mold cools.
• Choose a spray mold cleaner to thoroughly flush the mold with fast evaporation or flash off.
• Add a rust preventative to prohibit these delicate finishes from rusting.

  • Gesswein® Mold Maintenance Set of 3

    Gesswein® Mold Maintenance Set of 3

    sku: 8162960

    This complete Mold Maintenance Kit is the ideal all-in-one solution for cleaning and protecting your molds. Perfect for use either at the bench or at the press, these products are sure to save your team time and money. Using these products in conjunction...

    $25.00 / Set of 3
    Add to Cart
  • Gesswein® Mold Polishing Ace (Case of 12)

    Gesswein® Mold Polishing Ace (Case of 12)

    sku: 8162946

    The mold polisher’s best friend! Mold Polishing ACE provides the most effective solution for cleaning your mold cavity during the polishing process. The acetone formula cleans and evaporates fast. Get into tight corners, ribs, and holes by using the...

    $52.00 / Pkg. of 12
    Add to Cart
  • Gesswein® Mold Polishing Ace 1 Can

    Gesswein® Mold Polishing Ace 1 Can

    sku: 8162945

    The mold polisher’s best friend! Mold Polishing ACE provides the most effective solution for cleaning your mold cavity during the polishing process. The acetone formula cleans and evaporates fast. Get into tight corners, ribs, and holes by using the...

    $7.15 / Each
    Add to Cart
  • Gesswein® Plastic Injection Mold Cleaner (Case of 12)

    Gesswein® Plastic Injection Mold Cleaner (Case of 12)

    sku: 8162952

    Clean your plastic injection mold with ease. The fast evaporating formula leaves no residue, so there is no need for wiping! Remove build-up of silicones, grease, oil and wax on surfaces. Ideal for cold molds. Does not contain chlorinated solvents and is...

    $62.87 / Pkg. of 12
    Add to Cart
  • Gesswein® Plastic Injection Mold Cleaner 1 Can

    Gesswein® Plastic Injection Mold Cleaner 1 Can

    sku: 8162951

    Clean your plastic injection mold with ease. The fast evaporating formula leaves no residue, so there is no need for wiping! Remove build-up of silicones, grease, oil and wax on surfaces. Ideal for cold molds. Does not contain chlorinated solvents and...

    $6.55 / Each
    Add to Cart
  • Gesswein® Plastic Injection Mold Release (Case of 12)

    Gesswein® Plastic Injection Mold Release (Case of 12)

    sku: 8162954

    A general purpose mold release spray for plastic injection molds. Can be used on all metals and thermoplastics such as ABS, Polypropylene, Nylon, Wax, Acrylic, Polycarbonate, Polyethylene, etc. Can also be used for rubber. This silicone based spray is...

    $68.03 / Pkg. of 12
    Add to Cart
  • Gesswein® Plastic Injection Mold Release 1 Can

    Gesswein® Plastic Injection Mold Release 1 Can

    sku: 8162953

    A general purpose mold release spray for plastic injection molds. Can be used on all metals and thermoplastics such as ABS, Polypropylene, Nylon, Wax, Acrylic, Polycarbonate, Polyethylene, etc. Can also be used for rubber. This silicone based spray is...

    $5.67 / Each
    Add to Cart
  • Gesswein® Rust Prevent Dry (Case of 12 Cans)

    Gesswein® Rust Prevent Dry (Case of 12 Cans)

    sku: 8162948

    Protect your molds with Gesswein's rust preventative treatments.  Use the dry formula when mold downtime is at a minimum.  Dry formula is easy to clean up and get the mold back into production quickly.  It is self-cleaning in startup, thus...

    $69.39 / Pkg. of 12
    Add to Cart
  • Gesswein® Rust Prevent Dry 1 Can

    Gesswein® Rust Prevent Dry 1 Can

    sku: 8162947

    Protect your molds with Gesswein's rust preventative treatments.  Use the dry formula when mold downtime is at a minimum.  Dry formula is easy to clean up and get the mold back into production quickly.  It is self-cleaning in startup, thus...

    $6.55 / Each
    Add to Cart
  • Gesswein® Rust Prevent Wet (Case of 12 cans)

    Gesswein® Rust Prevent Wet (Case of 12 cans)

    sku: 8162950

    Protect your molds with Gesswein’s rust preventative treatments. Wet formula is the choice when extreme protection is required or during lengthy downtime such as 1 year or more. If the mold is exposed to humid conditions, which can happen when shipping...

    $71.58 / Pkg. of 12
    Add to Cart
  • Gesswein® Rust Prevent Wet 1 Can

    Gesswein® Rust Prevent Wet 1 Can

    sku: 8162949

    Protect your molds with Gesswein’s rust preventative treatments. Wet formula is the choice when extreme protection is required or during lengthy downtime such as 1 year or more. If the mold is exposed to humid conditions, which can happen when shipping...

    $7.65 / Each
    Add to Cart
  • SALE
    Gesswein® Welding Prep Cleaner (Case of 12 Cans)

    Gesswein® Welding Prep Cleaner (Case of 12 Cans)

    sku: 8162944

    For the best weld result, use Welding Prep Cleaner to remove grease, oil, and other contaminants from the weld surface. This fast-evaporating solvent leaves no residue. Ideal for both TIG and laser welding.Contains no chlorinated solvents. VOC compliant...

    $61.04 / Pkg. of 12
    $71.81 15% Off
    Add to Cart
  • Gesswein® Welding Prep Cleaner 1 Can

    Gesswein® Welding Prep Cleaner 1 Can

    sku: 8162943

    For the best weld result, use Welding Prep Cleaner to remove grease, oil, and other contaminants from the weld surface. This fast-evaporating solvent leaves no residue. Ideal for both TIG and laser welding.Contains no chlorinated solvents. VOC compliant...

    $8.75 / Each
    Add to Cart