Power Hand® Standard Rotary Head Z-STX

$39.95 - $325.00
Total ---
This all-purpose rotary head is supplied standard with all Power Hand® 2X rotary handpieces. Fits all motor assemblies for PowerHand 2 and 3. Backed by a limited warranty that covers wear parts for 90 day and overall balance of parts for 6 months. Made in Japan.

Supplied with a 3/32" collet. 1/8" and 3.0mm collets sold separately.

Overall length: 3-1/4".  Diameter: 1" at motor end; 5/8" at collet end.
Every PH3 handpiece consists of 2 parts: a motor and a head with integrated quick-disconnect fitting to hold heads securely and make head changes fast. Optional heads are available so you can create your own custom handpieces to suit your individual requirements.
For optimal performance of specialty heads, choose the 8,000rpm, 15,000rpm or 30,000rpm Power Hand 3 Handpiece or Handpiece Motor as indicated in the chart below. For work requiring high torque at low speed, add in the 4:1 Reduction Gear.

Heads below fit both Power Hand 2 and Power Hand 3 handpiece motors.

Handpiece Heads
PH3 08X
Motor
8,000rpm
PH3 15X
Motor
15,000rpm
PH3 30X
Motor
30,000rpm
Mini-Filer Head
Reciprocating
12,000 strokes/min.


SZX Swing Head
Side-to-Side Reciprocating
8,000 strokes/min.


120° Angle Head Z-CNX
Max. 15,000rpm

90° Angle Head Z-ANX
Max. 15,000rpm

Micro Angle Head
Long Reach 90° Rotary
Max. 15,000rpm

Heavy-Duty Head
Rotary for 1/4" Shanks
Max. 30,000rpm
Slender Head*
Long Reach Rotary
Max. 55,000rpm
Standard Rotary Head*
Replacement Head
Max. 55,000rpm
4:1 Reduction Gear
Adds 4X Torque


Blue dot indicates optimal performance for head & motor combination.

* Both the Slender Head and the Standard Rotary Head work with all PH 3 Motors (M-08X, M-15X, M-20X, M-30X, M-35X, and M-55X).


  • 426
  • 434