- Makes strong, tough, tear-resistant permanent molds that last and last and do not decay with age.
- Normal cure time: only 60-90 minutes at room temperature. Faster (30 minute) cure is possible at slightly higher temperatures.
- Ideal for all Wax, CAD-CAM, RP, SLA and Resin Models.
- Economical: costs far less than traditional silicone RTV materials.
New LiquaFast ICE makes strong, tough, tear-resistant permanent molds that last and last and do not become soft with age. Works well with all RP types, including hard-to-mold Solidscape® designs. LiquaFast Ice’s low viscosity makes it easy to measure, mix and pour. Normal cure time is only 90 – 120 minutes. Faster cure is possible at only 50°C / 120°F. LiquaFast ICE is economical, costing far less than traditional silicone RTV materials. Made in the UK.
Sold in 1 Kilo (2.2 lbs.) Kits: 1/2 Kilo of Part A and 1/2 Kilo of Part B. See "Specifications" tab for more details.
Also sold in 4 Kilo kit, which is a non-stock item. Please allow extra time for delivery.
|Working Time at 23°C / 73°F:||15 minutes|
|Setting Time at 23°C / 73°F:||60 - 90 minutes|
|Setting Time at 50°C / 120°F:||30 minutes|
|Hardness:||40 – 43 Shore A|
|Mixing Ratio:||1 : 1 by weight|
|Tensile Strength:|| 3.5+/-0.5 N/mm2
|Tear Strength:||9+/-2.0 Nmm
|Shelf Life:||18 Months|
Container Size 1kg
Type RTV (Room Temp)
__AddtoCart Notes3 Catalog Page # 203
__Prop 65 Cancer and Reproductive Harm
__SDS File 1 https://cdn.gesswein.com/images/sds/10805_0_GRS050-Liquafast-Ice-A (1).pdf
__SDS File 2 https://cdn.gesswein.com/images/sds/10805_0_GRS050-Liquafast-Ice-B (1).pdf
For California Residents
Warning This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov .