GRS® QC Gravers - Flat, #43

sku: 8559964

Just sharpen and use. Eliminate tedious shaping—think of the time they’ll save you! Fit all GRS QC (quick-change) impact handpieces when mounted in GRS QC Holders. Also fit many other handpieces,...

GRS® QC Gravers - Flat, #41

sku: 8559963

Just sharpen and use. Eliminate tedious shaping—think of the time they’ll save you! Fit all GRS QC (quick-change) impact handpieces when mounted in GRS QC Holders. Also fit many other handpieces,...

GRS Repl. Bench Pin for 8560192

sku: 8560201

This is the GRS Replacement Bench Pin only for GRS Bench Pin and Mount 8560192.  Mount is not sold individually but of course you need to be able to replace this wooden pin.  

GRS® Step Risers For Microblock-Set 5

sku: 8560176

Increase the height of your GRS Mircoblock by 0.5" and up to 2.5" with the GRS Step Risers.  Comes complete in a Set of 5 to allow the user to increase the height of their Microblock (not...

Repl. GRS® Plastic Mandrel Set of 7

sku: 8560175

Replacement Collet Set for holding ring sizes 4-13.  This set of 7 collets is the same one which comes with the Horizontal Inside Ring Holder (856-0209) and Inside Ring Mandrel...

GRS® Repl. Tungsten Tweezer Tip

sku: 8560179

Replace the standard tips of your GRS BenchMate Third Hand (not included) with these tungsten tips - sold individually - and you can then solder with platinum without risk of contamination. Medium...

GRS® C-Max Graver #56 Tapered Round

sku: 8559821

This #56 Tapered Round GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the...

GRS® C-Max Graver #3 Onglette

sku: 8559819

This #3 Onglette (Point) GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the...

GRS® C-Max Graver #43 Tapered Flat

sku: 8559839

This #43 Tapered Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the...

GRS® C-Max Graver #43 Parallel Flat

sku: 8559827

This #43 Parallel Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the...

GRS® C-Max Graver #5 Onglette

sku: 8559820

This #5 Onglette (Point) GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the...

GRS® C-Max Graver #1 Onglette

sku: 8559818

This #1 Onglette (Point) GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the...

GRS® C-Max Graver #55 Tapered Round

sku: 8559814

This #55 Tapered Round GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the...

GRS® C-Max Graver #54 Tapered Round

sku: 8559813

This #54 Tapered Round GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the...

GRS® C-Max Graver #50 Tapered Round

sku: 8559809

This #50 Tapered Round GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the...

GRS® GraverMeister®

sku: 8560049

The original standalone machine. This unit comes ready to use with its own oil-less air compressor, making it readily portable.Features adjustable speed of 1,600–2,400 strokes/minute (sliding lever...

GRS ® Universal Positioning Pin Vise

sku: 8560340

This workholding solution turns any vise into a positioning vise. The rail system on the bottom fits into the jaws of any GRS vise. Can't be used in the BenchMate QC or BenchMate QCX, see 856-0339...

GRS® Low-Profile Vise Assembly

sku: 8560315

GRS Low-Profile Vise Assembly Find just the right working height under a microscope with the GRS Low-Profile Vise.  This model offers GRS strength and highest quality allowing...

GRS® GraverMax® G8 - without Handpiece

sku: 8560311

Revamped for better performance! The venerable GraverMax tradition continues with this affordable, compact system. Features adjustable speed of 400–8,000 strokes per minute, adjustable...

GRS® MicroBlock® Ball Vise with 30-Piece Attachment Set

sku: 8560305

A high-quality miniature engraving block with compact, low-profile design. Perfect for microscope work and other jobs where a larger vise is an obstacle. Smooth, self-centering jaw system is perfect...

GRS® MicroBlock® Ball Vise

sku: 8560304

A high-quality miniature engraving block with compact, low-profile design. Perfect for microscope work and other jobs where a larger vise is an obstacle. Smooth, self-centering jaw system is perfect...

GRS® #940 Magnum Quick-Change Handpiece

sku: 8560303

The compact handpiece with an unmatched combination of power and control — try it and you'll be more than impressed with its full range of power from very fine to amazingly heavy. In fact it...

GRS® #509 Large Quick-Change Handpiece

sku: 8560301

The most powerful Gravermeister handpiece available. Great for heavy metal engraving, hammering and wood carving. Includes 6 quick-change holders. Measure 6" long. Weighs 7.9 oz.

GRS® Dual Angle Sharpening Fixture without Stand & Post

sku: 8560299

Use this sharpening fixture with the GRS Power Hone* for accurate and precise tools that last longer and provide a better cutting tool. Holds gravers with or without handles and those in QC...

GRS® Ring Holding Clamp

sku: 8560296

Uses leather lining to prevent objects from marring. Fits GRS Engraver’s Blocks (and is included in the GRS  Attachment Set, see "Related Products" below).

GRS® Combination Tool Carousel

sku: 8560293

Spend more time engraving and less time searching for tools with this efficient organizer. Holds 30 standard tools and gravers in the top tray. The bottom has four removable color-coded tool...

GRS® Apex Sharpening System

sku: 8560291

The Apex Sharpening System is the perfect fixture for anyone from the novice learning to sharpen their first graver to the veteran seeking efficient repeatability. The Apex is an innovative...

GRS® Diamond & Stone High-Speed Bur Set, 1/16" Shanks

sku: 8560289

4 diamond and 2 stone high-speed burs especially for glass, stone and similar materials. Shank diameter: 1/16" (0.062") (1.6mm). Use with GRS #850 Ultra-High Speed Handpiece (see...

GRS® High-Speed Carbide Bur Set, 1/16" Shank

sku: 8560288

6-Piece versatile carbide assortment for most metals, wood, and general work. Shank diameter: 1/16" (1.6mm). Use with GRS #850 Ultra-High Speed Handpiece (see "Related Products" below). ...

GRS® #610 Hammer Handpiece

sku: 8560280

This exceptional impact tool offers both power for stone setting and control necessary for light jobs. Operates with tool directly on work rather than loosely above it for less stone damage...

GRS Attachment Set for Multi Purpose Vise

sku: 8560279

This wide variety of pins and holders make it easy to hold both irregular and/or delicate items securely, when using the GRS Multi-Purpose Vise (our 856-0172).  Includes 4 one-half...

GRS® 30-Piece Attachment Set

sku: 8560277

With a variety of pins that fit the upper jaw plates of every GRS Block, users can now instantly solve workholding problems and start working sooner. Includes 30 small attachments for GRS...

GRS® Magnablock with 30-Piece Attachment Set

sku: 8560276

Solid steel construction for exceptional durabilityAdjustable friction lock from zero to full lock for crown rotation controlNonglare satin finish on body, black oxide finish on jaws for...

GRS® Magnablock Engravers Block

sku: 8560275

Solid steel construction for exceptional durabilityAdjustable friction lock from zero to full lock for crown rotation controlNonglare satin finish on body, black oxide finish on jaws for...

GRS® Power Hone - Cast Iron Lap

sku: 8560272

The low-cost, high-quality Diamond Wheels eliminate heat buildup in gravers and tools, last for years and stay flat for accuracy. Produce a fine, dependable finish. Excellent for sharpening...

GRS® Power Hone - Diamond Powder

sku: 8560271

#ec_spec { border: 0; border-collapse: collapse; width:100%; } #ec_spec > thead > tr { background-color: #dddddd; } #ec_spec > tbody > .ec_odd { background-color:...

GRS® GraverMach® AT

sku: 8560270

Never before has an all-in-one system given the user so much versatility and control. Features a simple selector knob for choice of hand or foot operation of your handpiece: the touch element, based...

GRS® QC Handle

sku: 8560264

Comfortable rubber-covered handle with shorter reach and more natural feel. Includes three QC (quick-change) Holders for fast tool changes. Accepts square tools up to 0.10" (2.5mm) wide,...

GRS® Power Hone - Diamond Spray (1 carat)

sku: 8560260

#ec_spec { border: 0; border-collapse: collapse; width:100%; } #ec_spec > thead > tr { background-color: #dddddd; } #ec_spec > tbody > .ec_odd { background-color:...

GRS® Power Hone 5" Wheel - 260 Grit

sku: 8560259

The low-cost, high-quality Diamond Wheels eliminate heat buildup in gravers and tools, last for years and stay flat for accuracy. Produce a fine, dependable finish. Excellent for sharpening...

GRS® Power Hone 5" Wheel - 600 Grit

sku: 8560256

The low-cost, high-quality Diamond Wheels eliminate heat buildup in gravers and tools, last for years and stay flat for accuracy. Produce a fine, dependable finish. Excellent for sharpening...

GRS® Handheld Ring Clamp

sku: 8560248

Replaceable jaw inserts hold rings securely and without marring for stone setting, filing, and finishing. Lighter for hand than the BenchMate® holder so ideal for hand use. Machined from aluminum and...

GRS® ID Ring Holder

sku: 8560215

Secure your rings while you work on them with ease, versatility and precision by using the GRS® ID Ring Holder. Simply secure the ring holder in any GRS® bench block or any common bench vise to...

GRS® Insulated Solder Clamp

sku: 8560212

Jaws are non-asbestos solder board material so they won't draw heat. No heat absorption means all heat says in the work. The surface texture is perfect for gripping items securely without damage...

GRS® Inside Ring Mandrel

sku: 8560210

Expands to securely hold rings from the inside so you can work on the outside. Gain improved access for working on many different ring styles by holding from the inside. This increases your...

GRS® Inside Ring Holder for Vises

sku: 8560209

Holds rings from the inside for easy stone setting or engraving. Safely handles tapered and delicate designs that can be crushed by ordinary ring clamps. Fits in all GRS Engraver’s Blocks...

GRS® BenchMate® Encore QCX: Stone Setter’s Package

sku: 8560205

The GRS BenchMate Encore launches the next generation of efficient, versatile workholding tools. These innovative updates to an industry standard provide better and faster methods for everyday work...

GRS® BenchMate® Encore QCX: Basic Package

sku: 8560204

The GRS BenchMate Encore launches the next generation of efficient, versatile workholding tools. These innovative updates to an industry standard provide better and faster methods for everyday work...

GRS® BenchMate® Encore QC: Stone Setter’s Package

sku: 8560203

The GRS BenchMate Encore launches the next generation of efficient, versatile workholding tools. These innovative updates to an industry standard provide better and faster methods for everyday work...

GRS® BenchMate® Encore QC: Basic Package

sku: 8560202

The GRS BenchMate Encore launches the next generation of efficient, versatile workholding tools. These innovative updates to an industry standard provide better and faster methods for everyday work...